 |
Outboard spherical bearings take care of rotor shaft mis-alignment and also prevents plastic dust from entering into the bearings.
|
 |
|
Fixed blades are located in inclined plane, which reduces fly back of material and ensures positive feeding of hollow articles into the cutting chamber. |
 |
|
The scissor action of Rotary & Fixed Blades reduces energy consumption |
|
|
Hinged two piece cutting chamber for easy changing of blades & cleaning the chamber. |
 |
|
Sieve is cradle mounted for easy removal & cleaning. |
 |
|
Bearing is with taper bore & sleeve type, for easier removal. Or bearing is ucp type. |
|
|
Bore of rotor pulley & flywheel are tapered for easy removal & maintenance. |
|
|
Minimum clearance between rotary blades & sieve prevents unnecessary rubbing of plastic pieces leading to energy saving. |
|
|
Blades are manufactured from Tool Steel, duly hardened and ground. |
|
|
Fix & rotary blades both can be adjusted to set the required clearance between rotary & fix blade thereby, rotary blade & fix blade are used to the fullest extent. In rotor we have provided slots, instead of threads in rotor, for fitting rotary blade with rotor. The disadvantage with threads is that in due course of time, the threads get damaged & repairing becomes very expensive. |
 |
|
For proper belt tension adjustment & alignment with rotor pulley, the motor is fitted on motor plate, which slides in guides, & tension is adjusted by screw & nut arrangement. |
 |
|
Screw & nut arrangement for lifting hoper & and top chamber can also be provided, (Optional) |
 |
|
Water-cooling arrangement for bottom cutting chamber & rotor shaft cooling can also be provided. (Optional) |
 |
|
Rotor is balanced. |
|
|
We also manufacture Scrap Grinders staggered rotor . The basic advantage is higher cuts per revolution; hence lower power consumption & better quality of regrind. (Optional)
|
 |
|
We also manufacture Scrap Grinders constant cutting circle diameter. In these machines special fixtures are provided, which will set the blades outside the machine, thereby saving setting time.
|
 |
|
Scrap grinders with Ram press can also be manufactured. This is extremely useful for those who are in grinding of voluminous thin walled articles, it reduces fly back & feeds positively with pusher into the cutting chamber. The production with ram type of arrangement is enhanced by app. 25% than using he same machine without ram press. The ram press operates hydraulically or manually. |
 |
|
Scrap grinders with additional deflector blades can also be supplied to granulate heavy lumps. This deflector blades can be removed while granulating voluminous items (Optional) |
|
|
Provision for side wear plates can be provided in bottom chamber and top chamber of scrap grinder this enables to replace to wear plates are worn out thus increase the life of scrap grinder. (Optional) |
|
|
The granulated chips fall out side of the machine frame & thus not require trolley wheel bin for collection of granulated chips & thus avoid spilling of chips on the floor. |
 |
|
We also manufacture scrap grinders with “V” cut rotors. The“V” arrangement of rotary knives pushes the material in the centre of chamber, reducing wear on the side walls & tendency to plasticize. The wear on the blade is more even& equally distributed (OPTIIONAL) |
 |
